TL3695D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL3695 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Nominal Supply Current | 50mA |
| Output Current | 60mA |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Nominal Input Voltage | 2V |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 120mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 37 ns |
| Simplex/Duplex | Half Duplex |
| Supply Voltage1-Nom | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL3695D Overview
Designed for common LEDs, this driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package.The Tube package houses this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.Power supply for this differential driver is 4.75V~5.25V.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.The integrated terminations of this wide receiver allow it to drive and receive signals from data.It is packaged with 8 pinouts that are market standard for this particular transceiver.Since the base part number TL3695 describes the product type, temperature, package, etc., you might get more options by searching with it.An enhanced power dissipation driver IC with 8 pins.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.It is typical for this receiver to have a resolution of 1 bits when it is specified.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.There is a subcategory called Line Driver or Receivers for this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.The module isolated transceiver implements a total of 1 transceivers.As a result of the embedded architecture of this optical transceiver, there are 2 channels in total.As a result of this bluetooth transceiver, its output current is 60mA.
TL3695D Features
Tube package
8 pin count
8 pins
5V power supply
2 channels
TL3695D Applications
There are a lot of Texas Instruments TL3695D Drivers/Receivers/Transceivers applications.
- Tuner
- Single to Multimode Fiber Conversion
- Aircraft navigation
- Bridges
- Desktop PC
- Cordless telephone
- Carrier phase observations
- Aircraft positioning
- Notebook
- Ship
