TL3695DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL3695 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 50mA |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 120mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 37 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 22 ns |
| Supply Voltage1-Nom | 5V |
| High Level Input Current-Max | 0.00002A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL3695DR Overview
Designed for common LEDs, this driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package.The Cut Tape (CT) package contains this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.A Surface Mount-type PCB or development board can be used to place this wide receiver.This differential driver consumes 4.75V~5.25V for its power supplyThis electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.Wide receiver can operate within the range of 5V supply voltages efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.There are 8 pinouts available on this transceiver which are market standard.With the part number TL3695 identifying the product type, temperature, package, etc., you can search with it to see more variants.Wide receiver with enhanced power dissipation control, 8-pin.It provided a 1-bit resolution capability with this ic receiver.There is typically a resolution of 1 bits specified with this receiver.An input voltage supply of 5V is required to operate the transceiver module.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.IC5V is a high performance driver IC designed to work with a 5V power supply.The module isolated transceiver implements a total of 1 transceivers.With this integrating circuit you can drive LEDs of a voltage of up to 50mA. It can be used to drive large displays.
TL3695DR Features
Cut Tape (CT) package
8 pin count
8 pins
5V power supply
TL3695DR Applications
There are a lot of Texas Instruments TL3695DR Drivers/Receivers/Transceivers applications.
- Mainframes, workstations or storage devices
- Laser diode bonding
- SONET/SDH Network
- Wireless projection application for business talks
- Precision engineering measurement
- Wireless security systems
- 1x/2x Fiber Channel
- Satellite radio receiver
- Satellite ground stations
- Wireless network systems
