TL3845DR-8

8 Terminals 7.6V~30V 8-Pin TL3845 DC to DC converter ICSWITCHING REGULATOR 1 Outputs 100kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TL3845DR-8
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 364
Description: 8 Terminals 7.6V~30V 8-Pin TL3845 DC to DC converter ICSWITCHING REGULATOR 1 Outputs 100kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	72.603129mg
Operating Temperature	0°C~70°C TA
Packaging	Cut Tape (CT)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	15V
Frequency	500kHz
Base Part Number	TL3845
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	30V
Output Type	Transistor Driver
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING REGULATOR
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	7.6V~30V
Quiescent Current	11mA
Control Features	Frequency Control
Topology	Boost, Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	100kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	50ns
Supply Current-Max (Isup)	30mA
Synchronous Rectifier	No
Fall Time (Typ)	50 ns
Nominal Input Voltage	5.5V
Max Duty Cycle	48 %
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL3845DR-8 Overview

It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Cut Tape (CT) solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. dc controls with 7.6V~30V voltage are supplied and operated. Suitable for working in an dc switcher that has a 0°C~70°C TA. There is a switch at 100kHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. Connected to a SWITCHING REGULATOR analog IC, the switch converters are connected to a power supply. A switching converters's terminal (s) sits at the DUAL position. 8 terminations with various dc switching's functions. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. In addition to "TL3845", there are other relevant dc to dc converter ics you can find. There are only 8 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 30V. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 48 % during power-up and power-down. A frequency of 500kHz is set for the switching controller. There are several dc to dc voltage regulator in the Automotive, AEC-Q100 series. The dc switching utilizes 11mA when it is in a dormant state. For nominal working status, the input voltage can be set as 5.5V. Switching controller is necessary to provide a voltage of 15V. It is important that the controller is supplied with 30mA more than 30mA volts of current.