TL4242DRJR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 10.886217mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Current Rating | 500mA |
| Frequency | 10kHz |
| Base Part Number | TL4242 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Supply Voltage | 42V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 22mA |
| Output Current | 476mA |
| Max Supply Current | 22mA |
| Max Output Voltage | 16V |
| Voltage - Output | 16V |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 42V |
| Output Characteristics | CONSTANT-CURRENT |
| Min Output Voltage | 400mV |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Number of Segments | 1 |
| Multiplexed Display Capability | NO |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 670μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL4242DRJR Overview
In order to save board space, the 8-WDFN Exposed Pad package is used. This LED driver has 1 outputs.As a mounting method, Surface Mount is used.In this case, the result is a Linear with high efficiency.-40°C~150°C TJ is the operating temperature and it works fine.In the 10kHz frequency range, it operates.In order for it to operate, it has 8 terminations.There are 8 pins used to form the base of its configuration.We estimate that there are 1 segments.LED drivers can be found under the base part number TL4242.There is no problem with the voltage of 42V.The voltage at the output terminal is 16V.There are 8 pins on this device.It is also classified into Display Drivers according to its characteristics.The minimal input voltage is 4.5V.With a minimal supply voltage of 4.5V, it reaches the highest efficiency levels.In the event that the maximum supply current is allowed, it reaches 42V.With a minimum supply current less than 22mA, this device achieves high efficiency.476mA is the maximum amount of current that can be supplied to the load.If the output voltage exceeds 16V, it should be corrected.400mV is the minimal voltage it outputs.
TL4242DRJR Features
Available in the 8-WDFN Exposed Pad package
Operating temperature of -40°C~150°C TJ
Frequency of 10kHz
Supply voltage of 13.5V
TL4242DRJR Applications
There are a lot of Texas Instruments TL4242DRJR LED Driver ICs applications.
Replacement lamps
High-end retail lighting
Auxiliary lights for on-vehicle cameras
Linear fluorescent
Down lighting
Gallery lighting
Dimmable LED for vehicle interiors
LED Lightings for Industrial Equipment
Scanners and Handy Terminals
Street lighting
