TL441MNSREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 500Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Analog Computational Functions |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TL441 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 16V |
| Number of Elements | 8 |
| Power Supplies | +-6V |
| Number of Circuits | 1 |
| Analog IC - Other Type | LOG OR ANTILOG AMPLIFIER |
| Operating Supply Current | 18.5mA |
| Power Dissipation | 201mW |
| Max Output Voltage | 5.85V |
| Response Time | 20 ns |
| Amplifier Type | Logarithmic |
| Max Input Voltage | 1V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 70mV |
| Bandwidth | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -6V |
| Min Output Voltage | 5.45V |
| Max Dual Supply Voltage | 8V |
| Number of Amplifiers | 2 |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL441MNSREP Overview
It is packaged in an 16-SOIC (0.209, 5.30mm Width)-case that protects the operational amplifiers from damage. Buffer amps of this type are called Logarithmic-types. A Tape & Reel (TR) case is used for delivering the op amp. The total number of pins on linear amplifier is 16. It is important to remember that this op amp should be operated at a voltage of 6V volts. This particular linear amplifier is a type of Analog Computational Functions device, to be precise. The op amp ic has an array of 16 pins on it. Op amp rates 70mV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -55°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 18.5mA and 10 . In total, there are 1 circuits on this buffer amplifier. The total number of elements in this buffer amplifier is 8. The operating supply voltage of instrumentation amplifier is rated 16V voltage. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 8V volts. It is recommended to keep the buffer amps resistance within the range of 500Ohm. An analog IC that is also used in this instrumentation amplifier is referred to as the LOG OR ANTILOG AMPLIFIER type. On the linear amplifier, there are 2 amplifiers that are used.
TL441MNSREP Features
16 Pins
supply voltage of 6V
Resistance of 500Ohm
TL441MNSREP Applications
There are a lot of Texas Instruments TL441MNSREP Instrumentational OP Amps applications.
- Instrumentation
- Portable media players
- Laptop
- Differentiator circuits
- Communication
- Industrial control system
- Thermocouples
- PDA
- Power generator
- Cinema or auditorium audio system
