TL494CDG
| Parameters | |
|---|---|
| Output Phases | 1 |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | SWITCHMODE™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 7V |
| Topology | Buck, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 0.5A |
| Frequency - Switching | 200kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Duty Cycle (Max) | 48% |
| Clock Sync | No |
TL494CDG Overview
In the 16-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. For outputs of 2, this dc motor controller is suitable. An enclosure of Tube is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. dc control's supply and operating voltages are 7V~40V. Qualified to work in a 0°C~70°C TA dc switcher. With this switching controller, you can switch at 200kHz. dc dc regulators can be carried out with Surface Mount. In order to control switching efficiently, the dcdc regulator features Dead Time Control, Frequency Control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. 16 terminations with various dc switching's functions. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. It is recommended to use 7V as the minimum input voltage of dc dc voltage regulator. It should be noted that the dc to dc regulator only accepts 40V voltage as input voltage. Whenever the current value is 0.5A, switching converter outputs the highest possible value. SWITCHMODE? is a series of dc to dc voltage regulator.
TL494CDG Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
TL494CDG Applications
There are a lot of Rochester Electronics, LLC TL494CDG DC to DC converter applications.
- Smoke prevention equipment
- Geothermal power
- Energy management systems
- Die casting equipment
- Smoke exhaust equipment
- Pipe bending machines
- Solar power plants
- Adjustable voltage or current linear circuits
- Linear guide
- Plate bending machines
