TL494CNG

16 Terminals 7V~40V 16-Pin TL494 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 200kHz Transistor Driver

Manufacturer: ON Semiconductor
Nocochips NO: 598-TL494CNG
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 441
Description: 16 Terminals 7V~40V 16-Pin TL494 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 200kHz Transistor Driver (Kg)

Details

Tags

Parameters
Max Supply Current	15mA
Control Features	Dead Time Control, Frequency Control
Topology	Buck, Push-Pull
Control Mode	VOLTAGE-MODE
Common Mode Rejection Ratio	90 dB
Frequency - Switching	200kHz
Control Technique	PULSE WIDTH MODULATION
Input Offset Voltage (Vos)	2mV
Rise Time	100ns
Synchronous Rectifier	Yes
Fall Time (Typ)	40 ns
Nominal Input Voltage	40V
Max Duty Cycle	48 %
Input Bias Current	-100nA
Clock Sync	No
Output Phases	1
Height	4.8768mm
Length	21.336mm
Width	7.62mm
REACH SVHC	Unknown
RoHS Status	RoHS Compliant
Lead Free	Lead Free
Lifecycle Status	OBSOLETE (Last Updated: 2 days ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	1.627801g
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2005
Series	SWITCHMODE™
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Tin (Sn)
Subcategory	Switching Regulator or Controllers
Max Power Dissipation	1W
Technology	BIPOLAR
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Frequency	40kHz
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	TL494
Function	Step-Down, Step-Up/Step-Down
Number of Outputs	2
Output Voltage	30V
Output Type	Transistor Driver
Operating Supply Voltage	15V
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Power Dissipation	1W
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	7V~40V

TL494CNG Overview

This switching controller fits most application requirements since it is packaged in a 16-DIP (0.300, 7.62mm) package. 2 outputs are supported by the dc motor controller. PMIC is packaged in a solid enclosure of Tube. There are Transistor Driver dc switching's output (s) that it can handle. This dc control operates at 7V~40V and has a 7V~40V supply voltage. Suitable for work in a 0°C~70°C TA dc switcher. The switching controller can be switched at 200kHz. The Through Hole value makes it suitable for general dc dc regulator. Dead Time Control, Frequency Control is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. Various 16 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 15V. You can find other relevant dc to dc converter ics by searching "TL494". In total, switching converter has 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. A 30V voltage of DC regulator was detected in the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 48 %. As DC switcher has a Through Hole, it's suitable for most applications and prototype designs. Switching controller operates at a frequency of 40kHz. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 15V. There are several dc to dc voltage regulator in the SWITCHMODE? series. Input voltage can be set to 40V for nominal working status. Components may be damaged if their current is greater than 15mA.

TL494CNG Features

Transistor Driver Outputs
Switching Frequency: 200kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 48 %
Frequency: 40kHz