TL494CNSR

16 Terminals 7V~40V 16-Pin TL494 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 1kHz~300kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TL494CNSR
Package: 16-SOIC (0.209, 5.30mm Width)
Datasheet: PDF
Stock: 320
Description: 16 Terminals 7V~40V 16-Pin TL494 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 1kHz~300kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.209, 5.30mm Width)
Surface Mount	YES
Number of Pins	16
Weight	200.686274mg
Operating Temperature	0°C~70°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	15V
Frequency	300kHz
Base Part Number	TL494
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	2
Output Voltage	40V
Output Type	Transistor Driver
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	7V~40V
Max Supply Current	3.5mA
Quiescent Current	7.5mA
Control Features	Dead Time Control, Frequency Control
Input Voltage (Min)	7V
Topology	Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
Control Mode	VOLTAGE-MODE
Frequency - Switching	1kHz~300kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	100ns
Synchronous Rectifier	No
Fall Time (Typ)	40 ns
Max Duty Cycle	45 %
Output Phases	1
Height	2mm
Length	10.3mm
Width	5.3mm
Thickness	1.95mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL494CNSR Overview

With its 16-SOIC (0.209, 5.30mm Width) package, the switching controller fits the needs of most applications. For 2 outputs, the dc motor controller is appropriate. There is a Cut Tape (CT) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) are supported. A 7V~40V voltage is supplied to the dc control and used for operating it. Suitable for a 0°C~70°C TA dc switcher. Using this switching controller, it is possible to switch at 1kHz~300kHz. dc dc regulator is made easier with Surface Mount. The dcdc regulator features Dead Time Control, Frequency Control for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 16. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. You can find other relevant dc to dc converter ics by searching "TL494". 16 pins are present on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 7V. Based on the test statistics, DC regulator outputs voltage 40V. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 45 %. Switching controller operates at 300kHz Hz. When the dc switching is dormant, it uses 7.5mA. Switching controller is necessary to provide a voltage of 15V. Components may be damaged if their current is greater than 3.5mA.

TL494CNSR Features

Transistor Driver Outputs
Switching Frequency: 1kHz~300kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz