TL497ACN
| Parameters | |
|---|---|
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive or Negative |
| Current - Output | 500mA Switch |
| Quiescent Current | 11mA |
| Max Output Voltage | 30V |
| Voltage - Output (Min/Fixed) | ±1.2V |
| Topology | Buck, Boost |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | -25V |
| Voltage - Output (Max) | 30V -25V |
| Switching Frequency | 50kHz |
| Switching Current | 500mA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Weight | 925.810377mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Base Part Number | TL497 |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Efficiency | 60 % |
| Output Voltage | 35V |
| Output Type | Adjustable |
| Max Output Current | 500mA |
| Operating Supply Voltage | 12V |
TL497ACN Overview
For optimal performance, this voltage regulator uses the Tube package. In this voltage regulator, there are 14 terminations. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 14-DIP (0.300, 7.62mm) package. There are 1 outputs configured on the voltage regulator. DC DC switching regulators like this one generate Adjustable outputs on their output pins to handle the power management. Through Hole-mounting is compatible with this switching regulator. During switching regulator operation, the operating temperature should remain at 0°C~70°C TA. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 4.5V. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to ±1.2V. As a result of the 500mA Switch output current, voltage regulator offers maximum flexibility in design. An input voltage of 6V is required for switching regulator operation. There is a subcategory of this regulator voltage called Switching Regulator or Controllers. DC/DC regulators of this type are part of the TL497 family of voltage regulator 12vs. A voltage of 35V volts can be produced by voltage regulator. There are 14 pins that are used for the operation of the voltage regulator 12v. There should be at least a -25V volt output voltage for this switching regulator in order to make it work properly. For switching regulator maximum operation, dc to dc voltage regulator delivers 500mA A. The maximal output voltage of 30V -25V allows adjusting voltage regulator for simple operation. The maximum output voltage of this regulator voltage is 30V. 12V is the supply voltage for this DC-DC switching regulator. There is no external influence on harley voltage regulator as it consumes 11mA A of quiescent current. Voltage regulator 50kHz switching frequency can improve reliability.
TL497ACN Features
1 outputs
14 pins
Operating supply voltage of 12V
TL497ACN Applications
There are a lot of Texas Instruments TL497ACN Voltage Regulators applications.
- Elevator lighting
- Lathes
- Pipe bending machines
- Scientific research
- Digital display device
- Telecommunications equipment
- Milling machines
- Printing
- Wind power
- Imported equipment
