TL5001ACP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Base Part Number | TL5001 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 50V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~40V |
| Quiescent Current | 1.1mA |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 3.6V |
| Topology | Buck, Boost, Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 20kHz~500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 100% |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL5001ACP Overview
With its 8-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. An enclosure of Tube is used to package the PMIC. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 3.6V~40V volts and has 3.6V~40V supply voltage. Suitable for working in an dc switcher that has a -20°C~85°C TA. Switching can be done at 20kHz~500kHz with this switching controller. A generalization of dc dc regulator can be made using Through Hole. Dead Time Control, Frequency Control provides dcdc regulator efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. 8 terminations with various dc switching's functions. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. A DC switcher's nominal voltage of 6V is input. TL5001 can be searched for other relevant dc to dc converter ics. In total, switching converter has 8 pins. Switching converter is a special type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 3.6V. Statistically, the DC regulator outputs 50V voltage. If you start a project, note down the dc dc regulator's usual output current of 20mA. The Through Hole makes DC switcher suitable for most applications and prototypes. There is a maximum frequency of 500kHz for this dc regulators. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 40V. Dormant dc switchings use 1.1mA.
TL5001ACP Features
Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
TL5001ACP Applications
There are a lot of Texas Instruments TL5001ACP DC to DC converter applications.
- Thermal power
- Gear/thread machining machines
- Power supplies of electronic gadgets
- Computer application technology
- Various precision measuring detectors
- Imported equipment
- Direct power supply system
- Hydraulic presses
- seismic instrument power circuits
- Nuclear power plants
