TL5001AIDRG4

8 Terminals 3.6V~40V 8-Pin TL5001 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 20kHz~500kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TL5001AIDRG4
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 771
Description: 8 Terminals 3.6V~40V 8-Pin TL5001 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 20kHz~500kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	72.603129mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Base Part Number	TL5001
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	50V
Output Type	Transistor Driver
Max Output Current	3A
Operating Supply Voltage	40V
Input Voltage-Nom	6V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	20mA
Voltage - Supply (Vcc/Vdd)	3.6V~40V
Quiescent Current	1.1mA
Control Features	Dead Time Control, Frequency Control
Max Output Voltage	50V
Topology	Buck, Boost, Flyback
Min Input Voltage	3.6V
Control Mode	VOLTAGE-MODE
Frequency - Switching	20kHz~500kHz
Max Input Voltage	40V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Min Output Voltage	1V
Switcher Configuration	SINGLE
Max Frequency	500kHz
Duty Cycle (Max)	100%
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL5001AIDRG4 Overview

Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. For outputs of 1, this dc motor controller is suitable. An enclosure of Tape & Reel (TR) is used to package the PMIC. A total of Transistor Driver dc switching's outputs can be handled by it. A 3.6V~40V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~85°C TA rating. A switching controller such as this can switch at a value of 20kHz~500kHz . dc dc regulator is made easier with Surface Mount. Dead Time Control, Frequency Control provides dcdc regulator efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 8 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 6V nominal DC switcher's voltage input. TL5001 can be used to locate other relevant dc to dc converter ics. 8 pins are on switching converter. Statistically, the DC regulator outputs 50V voltage. It's important to remember that the dc dc regulator's normaloutput current is 20mA, so you should note it down when starting a new project. This dc regulatorhas a max frequency of 500kHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 40V. When the dc switching is dormant, it uses 1.1mA. The dc switcher's maximum input voltage is 40V; users must limit it accordingly. Switching controller is necessary to have a supply voltage of 3.6V. An output current greater than 3A cannot be provided by the dc switcher. A datasheet states that the switching converter can output 50V volts at its maximum. Neither the voltage controller's lowest voltage output 1Vr its highest voltage output is less than 1V.