Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Weight |
440.409842mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Termination |
Through Hole |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Power Dissipation |
1W |
Terminal Position |
DUAL |
Terminal Pitch |
2.54mm |
Frequency |
500kHz |
Base Part Number |
TL5001 |
Function |
Step-Up, Step-Down, Step-Up/Step-Down |
Number of Outputs |
1 |
Output Voltage |
50V |
Output Type |
Transistor Driver |
Max Output Current |
20mA |
Input Voltage-Nom |
6V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Operating Supply Current |
1.4mA |
Output Configuration |
Positive |
Power Dissipation |
1W |
Output Current |
20mA |
Voltage - Supply (Vcc/Vdd) |
3.6V~40V |
Quiescent Current |
1.1mA |
Control Features |
Dead Time Control, Frequency Control |
Max Output Voltage |
50V |
Topology |
Buck, Boost, Flyback |
Min Input Voltage |
3.6V |
Control Mode |
VOLTAGE-MODE |
Frequency - Switching |
20kHz~500kHz |
Max Input Voltage |
40V |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
No |
Nominal Input Voltage |
6V |
Switcher Configuration |
SINGLE |
Max Duty Cycle |
100 % |
Isolation |
Non-Isolated |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TL5001AIP Overview
With its 8-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. 1 outputs are supported by the dc motor controller. Packaging for the pmic consists of Tube solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. Voltages 3.6V~40V are the dc control's supply voltage and operating voltage, respectively. Suitable for working in an dc switcher that has a -40°C~85°C TA. This switching controller can switch at 20kHz~500kHz. dc dc regulators can be carried out with Through Hole. Featured in the dcdc regulator is Dead Time Control, Frequency Control which allows efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . 8 terminations with various dc switching's functions. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 6V. You can find other relevant dc to dc converter ics by searching "TL5001". Switching converter has a total of 8 pins. DC regulator outputs 50V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 20mA. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. This Through Hole makes DC switcher suitable for most prototypes and applications. Switching controllers work at 500kHz Hz. During dormancy, the dc switching uses 1.1mA. It is possible to set the input voltage to 6V for nominal working status. In order to ensure the dc switcher's functionality, users must limit the voltage to 40V due to the dc switcher's maximum input voltage. A voltage of 3.6V must be present in the supply. DC switchers cannot produce output currents greater than 20mA. Its datasheet indicates the switching converter can output a maximum of 50V volts. With a current supply of 1.4mA, it runs.
TL5001AIP Features
Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 500kHz
TL5001AIP Applications
There are a lot of Texas Instruments TL5001AIP DC to DC converter applications.
- Driver circuits
- Telecommunications equipment
- seismic instrument power circuits
- Arc suppression circuits
- Packaging
- Network technology
- Current source circuits
- Cutting machine tools
- Surge protection circuits
- Constant current circuits