TL5001AQD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Base Part Number | TL5001 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 50V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~40V |
| Quiescent Current | 1.1mA |
| Control Features | Dead Time Control, Frequency Control |
| Max Output Voltage | 50V |
| Topology | Buck, Boost, Flyback |
| Min Input Voltage | 3.6V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 20kHz~500kHz |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1V |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL5001AQD Overview
The switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. For outputs of 1, this dc motor controller is suitable. There is a Tube solid enclosure around the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. 3.6V~40V is the supply voltage and the operating voltage of the dc control. Work well in dc switchers with a -40°C~125°C TJ. The switching controller can be switched at 20kHz~500kHz. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Dead Time Control, Frequency Control for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . An array of 8 terminations of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 6V. Search for "TL5001" to find other relevant dc to dc converter ics. There are 8 pins on switching converter. Statistically, DC regulator outputs 50V volts. You should note down the dc dc regulator's usual output current of 20mA when you start a project. The switching controller works at a frequency of 500kHz. A circuit should contain 40V in order to ensure the voltage regulator dc to dc runs safely and reliably. The dc switching utilizes 1.1mA when it is in a dormant state. The dc switcher's maximum input voltage is 40V, so users must limit the voltage accordingly. A voltage of 3.6V must be present in the supply. There will be 3A output current greater than 3A from the dc switcher. Datasheets indicate that the switching converter can output 50V volts at its maximum. The voltage controller's lowest voltage output is not less than 1V.
TL5001AQD Features
Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Frequency: 500kHz
TL5001AQD Applications
There are a lot of Texas Instruments TL5001AQD DC to DC converter applications.
- Various CNC machine tools
- Ball screw pair
- Wind power
- Analog precision reference circuits
- Post equipment
- Medical equipment
- Overvoltage protection circuits in TV sets
- Driver circuits
- Serial communication converter
- Surge protection circuits
