TL5001AQDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Base Part Number | TL5001 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 50V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~40V |
| Quiescent Current | 1.1mA |
| Control Features | Dead Time Control, Frequency Control |
| Max Output Voltage | 50V |
| Topology | Buck, Boost, Flyback |
| Min Input Voltage | 3.6V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 20kHz~500kHz |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1V |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL5001AQDR Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC is packaged in a solid enclosure of Tape & Reel (TR). There are Transistor Driver dc switching's output (s) that it can handle. dc control's supply and operating voltages are 3.6V~40V. Qualified to work in a -40°C~125°C TJ dc switcher. There is a switch at 20kHz~500kHz that can be used with this controller. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Dead Time Control, Frequency Control which allows efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a DUAL terminal on the switching converters. An array of 8 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis 6V volts. Other relevant dc to dc converter ics can be found by searching "TL5001". 8 pins are on switching converter. Statistically, DC regulator outputs 50V volts. You should note that the dc dc regulator's usual output current is 20mA. 500kHz is the frequency of the switching controller. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 40V. When the dc switching is dormant, it uses 1.1mA. Because the dc switcher's maximum input voltage is 40V users must limit the voltage accordingly. Voltage 3.6V is necessary for the supply. In this case, the dc switcher won't produce more than 3A watts of output current. The switching converter can output 50V volts at its utmost, according to the datasheet. There is 1V voltage output lower than 1V on the voltage controller.
TL5001AQDR Features
Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Frequency: 500kHz
TL5001AQDR Applications
There are a lot of Texas Instruments TL5001AQDR DC to DC converter applications.
- Series voltage regulation circuits
- Thermal power
- Product testing
- SMT equipment
- Grinders
- Arc suppression circuits
- Remotely powered electric motors
- Gear/thread machining machines
- USB circuits
- Packaging
