TL5001AQDRG4

8 Terminals 3.6V~40V 8-Pin TL5001 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 20kHz~500kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TL5001AQDRG4
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 518
Description: 8 Terminals 3.6V~40V 8-Pin TL5001 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 20kHz~500kHz Transistor Driver (Kg)

Details

Tags

Parameters
Output Voltage	50V
Output Type	Transistor Driver
Max Output Current	3A
Operating Supply Voltage	40V
Input Voltage-Nom	6V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	1.1mA
Output Configuration	Positive
Output Current	3A
Voltage - Supply (Vcc/Vdd)	3.6V~40V
Quiescent Current	1.1mA
Control Features	Dead Time Control, Frequency Control
Max Output Voltage	50V
Topology	Buck, Boost, Flyback
Min Input Voltage	3.6V
Control Mode	VOLTAGE-MODE
Frequency - Switching	20kHz~500kHz
Max Input Voltage	40V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Min Output Voltage	1V
Switcher Configuration	SINGLE
Max Frequency	500kHz
Max Duty Cycle	100 %
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	75.891673mg
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Base Part Number	TL5001
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	1

TL5001AQDRG4 Overview

It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. The dc motor controller is adquate to generate for 1 outputs. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) are supported. dc controls with 3.6V~40V voltage are supplied and operated. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. A switching controller such as this can switch at a value of 20kHz~500kHz . dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Dead Time Control, Frequency Control which allows efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . An array of 8 terminations of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input of 6V. Other relevant dc to dc converter ics can be found by searching "TL5001". There are 8 pins on switching converter. Statistically, the DC regulator outputs 50V voltage. normally, the dc dc regulator's output current is 3A, which you should keep in mind when starting a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 100 %. 500kHz is the maximum frequency of this dc regulators. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 40V. DC switchings that are dormant use 1.1mA. The maximum input voltage of this dc switcher is 40V, so users must limit the voltage accordingly. Voltage 3.6V must be supplied. DC switcher will not be able to provide an output current above 3A volts. At its maximum output, the switching converter can provide 50V volts. There is 1.1mA supply current for it. A voltage controller's lowest output voltage cannot be less than 1V.