TL5001CDRG4

8 Terminals 3.6V~40V 8-Pin TL5001 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 20kHz~500kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TL5001CDRG4
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 907
Description: 8 Terminals 3.6V~40V 8-Pin TL5001 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 20kHz~500kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	72.603129mg
Operating Temperature	-20°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Base Part Number	TL5001
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	50V
Output Type	Transistor Driver
Max Output Current	3A
Operating Supply Voltage	40V
Input Voltage-Nom	6V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	20mA
Voltage - Supply (Vcc/Vdd)	3.6V~40V
Quiescent Current	1.1mA
Control Features	Dead Time Control, Frequency Control
Max Output Voltage	50V
Topology	Buck, Boost, Flyback
Min Input Voltage	3.6V
Control Mode	VOLTAGE-MODE
Frequency - Switching	20kHz~500kHz
Max Input Voltage	40V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Min Output Voltage	1V
Switcher Configuration	SINGLE
Max Frequency	500kHz
Duty Cycle (Max)	100%
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL5001CDRG4 Overview

The switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 3.6V~40V volts and has 3.6V~40V supply voltage. Suitable for work in a -20°C~85°C TA dc switcher. The switching controller is capable of switching at the 20kHz~500kHz position. A generalization of dc dc regulator can be made using Surface Mount. DCDC regulator is controlled efficiently by Dead Time Control, Frequency Control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 8 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 6V is input. You can find other relevant dc to dc converter ics by searching "TL5001". 8 pins are on switching converter. Statistically, DC regulator outputs 50V volts. It's important to remember that the dc dc regulator's normaloutput current is 20mA, so you should note it down when starting a new project. 500kHz is the maximum frequency of this dc regulators. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 40V. In dormant mode, 1.1mA is used. The maximum input voltage of the dc switcher is 40V, so users need to limit the voltage accordingly. The supply voltage must be 3.6V. A dc switcher can only produce an output current of 3A. Its datasheet indicates the switching converter can output a maximum of 50V volts. Neither the voltage controller's lowest voltage output 1Vr its highest voltage output is less than 1V.