TL5001CPSRG4
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 6V |
| Temperature Grade | OTHER |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Current - Output | 20mA |
| Quiescent Current | 1.1mA |
| Frequency (Max) | 500kHz |
| Max Output Voltage | 50V |
| Voltage - Output | 50V |
| Topology | Boost, Flyback |
| Min Input Voltage | 3.6V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 1V |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100 % |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Package / Case | SOP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 122.611688mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
TL5001CPSRG4 Overview
As a result of SOP compact design, the switching controller is compatible with most applications. The dc motor controller is adquate to generate for 1 outputs. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . A variety of terminations with 8 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 6V is input. There are 8 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. It is suggested that users apply 40V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. The temperature should be at least -25°C. The temperature should not exceed 85°C degrees Celsius. In total, the switch converters have 1 function (s). During dormancy, the dc switching uses 1.1mA. There is a design for voltage regulators switching with 8 pins. The controller can set a maximum frequency of 500kHz. The maximum input voltage of dc switcher is 40V, so users should limit their voltage accordingly. A 20mA input switching controller would benefit from it. It outputs a voltage of 50V when working normally. A voltage of 3.6V must be present in the supply. Output current will not exceed 3A. As per its datasheet, the switching converter has a maximum output of 50V volts. Neither the voltage controller's lowest voltage output 1Vr its highest voltage output is less than 1V.
TL5001CPSRG4 Features
PULSE WIDTH MODULATION
TL5001CPSRG4 Applications
There are a lot of Texas Instruments TL5001CPSRG4 DC to DC converter applications.
- Wind power
- Computed tomography (CT)
- Fire elevators
- Arc suppression circuits
- Network technology
- Product testing
- Drilling machines
- Balance equipment
- Solar power plants
- Thermal power
