TL5001ID
| Parameters | |
|---|---|
| Duty Cycle (Max) | 100% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Base Part Number | TL5001 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 50V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~40V |
| Quiescent Current | 1.1mA |
| Control Features | Dead Time Control, Frequency Control |
| Max Output Voltage | 50V |
| Topology | Buck, Boost, Flyback |
| Min Input Voltage | 3.6V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 20kHz~500kHz |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1V |
| Switcher Configuration | SINGLE |
TL5001ID Overview
It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. There is sufficient capacity to generate switching controller for outputs 1. Packaging for the pmic consists of Tube solid enclosures. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc control's supply and operating voltages are 3.6V~40V. Qualified to work in an dc switcher with -40°C~85°C TA. It can switch at 20kHz~500kHz. dc dc regulator is made easier with Surface Mount. To provide efficient switching control, Dead Time Control, Frequency Control is included in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. Various 8 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 6V. Other relevant dc to dc converter ics can be found by searching "TL5001". Total pins of switching converter are 8. Test statistics indicate DC regulator outputs 50V voltage. In most cases, the output current of the dc dc regulator will be 20mA, so note that when you start the project. Switching controller operates at 500kHz Hz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 40V. DC switchings that are dormant use 1.1mA. Because the dc switcher's maximum input voltage is 40V users must limit the voltage accordingly. In order to use a 3.6V voltage supply, switching controller is necessary to have one. An output current greater than 3A cannot be provided by the dc switcher. Datasheets indicate that the switching converter can output 50V volts at its maximum. There is 1V voltage output lower than 1V on the voltage controller.
TL5001ID Features
Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Frequency: 500kHz
TL5001ID Applications
There are a lot of Texas Instruments TL5001ID DC to DC converter applications.
- Driver circuits
- Analog precision reference circuits
- Handheld GPS
- SMT equipment
- Access control systems
- Various precision measuring detectors
- Industrial robots
- Communication system
- Scientific testing
- Automatic testing equipment
