TL5001IDRG4

8 Terminals 3.6V~40V 8-Pin TL5001 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 20kHz~500kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TL5001IDRG4
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 246
Description: 8 Terminals 3.6V~40V 8-Pin TL5001 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 20kHz~500kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	72.603129mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Base Part Number	TL5001
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	50V
Output Type	Transistor Driver
Max Output Current	3A
Operating Supply Voltage	40V
Input Voltage-Nom	6V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	20mA
Voltage - Supply (Vcc/Vdd)	3.6V~40V
Quiescent Current	1.1mA
Control Features	Dead Time Control, Frequency Control
Max Output Voltage	50V
Topology	Buck, Boost, Flyback
Min Input Voltage	3.6V
Control Mode	VOLTAGE-MODE
Frequency - Switching	20kHz~500kHz
Max Input Voltage	40V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Min Output Voltage	1V
Switcher Configuration	SINGLE
Max Frequency	500kHz
Max Duty Cycle	100 %
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL5001IDRG4 Overview

It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 3.6V~40V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. It can switch at 20kHz~500kHz. dc dc regulators can be carried out with Surface Mount. To ensure efficient switching, this dcdc regulator features a Dead Time Control, Frequency Control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminal (s) are designed at DUAL . Different dc switching's functions can be applied to 8 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 6V. In addition to "TL5001", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 8 pins. DC regulator outputs 50V voltage according to the test statistics. The dc dc regulator's usual output current is 20mA, which should be noted down when you start a project. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. The max frequency of the pmic can reach 500kHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 40V. DC switching uses 1.1mA when it is dormant. In order to limit the voltage of a dc switcher whose maximum input voltage is 40V, it must be limited by the user. Voltage 3.6V must be supplied. The dc switcher will not provide an output current greater than 3A. As per its datasheet, the switching converter has a maximum output of 50V volts. Its lowest voltage output is not less than 1V.