TL5001QDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TL5001 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 50V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~40V |
| Quiescent Current | 1.1mA |
| Control Features | Dead Time Control, Frequency Control |
| Max Output Voltage | 50V |
| Topology | Buck, Boost, Flyback |
| Min Input Voltage | 3.6V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 20kHz~500kHz |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1V |
| Switcher Configuration | SINGLE |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 100% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL5001QDR Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. For outputs of 1, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tape & Reel (TR). There are Transistor Driver dc switching's output (s) that it can handle. dc controls with 3.6V~40V voltage are supplied and operated. Work well in dc switchers with a -40°C~125°C TJ. Switching can be done at 20kHz~500kHz with this switching controller. dc dc regulator can be generalized using Surface Mount. Dead Time Control, Frequency Control is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a DUAL terminal on the switching converters. There are many different types of terminations for 8. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input is 6V. A search for "TL5001" will reveal other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Test statistics indicate DC regulator outputs 50V voltage. In most cases, the dc dc regulator's output current is 20mA. This information should be noted when you begin working with the component. DC regulators have a maximum frequency of 500kHz. It is suggested that users apply 40V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. In dormant mode, 1.1mA is used. The maximum input voltage of this dc switcher is 40V, so users must limit the voltage accordingly. There must be a 3.6V supply voltage. Input current cannot exceed 3A with this dc switcher. Datasheets indicate that the switching converter can output 50V volts at its maximum. Lowest voltage output of the voltage controller must be greater than 1V.
TL5001QDR Features
Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
TL5001QDR Applications
There are a lot of Texas Instruments TL5001QDR DC to DC converter applications.
- Domestic water pumps
- Precision electronic equipment
- Analog precision reference circuits
- Nuclear power plants
- Surface processing equipment
- CNC system
- Electrical power transmission
- Wind power
- Imported equipment
- Network technology
