TL5002ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TL5002 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 40V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 21mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~40V |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 3.6V |
| Topology | Boost, Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 20kHz~500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 500kHz |
| Max Duty Cycle | 100 % |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL5002ID Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. dc motor controller is suitable for 1 output generation. Tube is the solid enclosure in which PMIC is packaged. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sDC control operates at 3.6V~40V volts and has 3.6V~40V supply voltage. Worked in a -40°C~85°C TA dc switcher before. It can switch at 20kHz~500kHz. The Surface Mount makes it ideal for general dc dc regulator. The dcdc regulator features Dead Time Control, Frequency Control for efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Switching converters are designed with the terminal (s) at position DUAL . 8 terminations with a variety of function. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 6V. A search for "TL5002" will reveal other relevant dc to dc converter ics. In total, switching converter has 8 pins. In particular, switching converter is a type of Switching Regulator or Controllers. An input voltage of 3.6V is the minimum required for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 40V. The dc dc regulator's usual output current is 21mA, which should be noted down when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. The max frequency of the pmic can reach 500kHz. A circuit should contain 40V in order to ensure the voltage regulator dc to dc runs safely and reliably.
TL5002ID Features
Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
TL5002ID Applications
There are a lot of Texas Instruments TL5002ID DC to DC converter applications.
- Magnetohydrodynamic power
- Television equipment
- Smoke exhaust equipment
- Medical monitoring systems
- Drilling machines
- Various precision measuring detectors
- Laboratories
- Imported equipment
- Linear guide
- Wind power
