TL5002IDG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TL5002 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 40V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 21mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~40V |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 3.6V |
| Topology | Boost, Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 20kHz~500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 500kHz |
| Max Duty Cycle | 100 % |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL5002IDG4 Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. dc motor controller is suitable for 1 output generation. An enclosure of Tube is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. Voltages 3.6V~40V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~85°C TA dc switcher. Switching can be done at 20kHz~500kHz with this switching controller. The Surface Mount value makes it suitable for general dc dc regulator. Dead Time Control, Frequency Control provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Thare switching converters has a terminal (s) at DUAL . Various 8 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 6V. In addition to "TL5002", there are other relevant dc to dc converter ics you can find. 8 pins are on switching converter. Switching converter is a special type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 3.6V. DC regulator outputs 40V voltage according to the test statistics. In most cases, the output current of the dc dc regulator will be 21mA, so note that when you start the project. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. 500kHz is the maximum frequency of this dc regulators. It is suggested that users apply 40V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit.
TL5002IDG4 Features
Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
TL5002IDG4 Applications
There are a lot of Texas Instruments TL5002IDG4 DC to DC converter applications.
- Electrical distribution systems
- Remotely powered electric motors
- Industrial robots
- Hydraulic presses
- Linear guide
- PSRR circuits
- Serial communication converter
- Injection molding machinery
- Computer-related products
- Product burn-in
