TL5580AIP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | TL5580 |
| Pin Count | 8 |
| Operating Supply Voltage | 16V |
| Number of Circuits | 2 |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 9mA |
| Output Current | 50mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 4V~32V ±2V~16V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 12MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 12000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 12MHz |
| Max I/O Voltage | 1mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.075μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL5580AIP Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. An op amp of this type is a General Purpose-type. Linear amplifier is delivered in a Tube case. The number of terminations approaches 8. The pins on this board total to 8 in total. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 300μV. For this electrical component, Through Hole is the recommended mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using an 6mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 110dB is the best course of action. There are 2 circuits on op amps. The operating supply voltage of instrumentation amplifier is rated 16V voltage.
TL5580AIP Features
8 Pins
supply voltage of 15V
110dB voltage gain
TL5580AIP Applications
There are a lot of Texas Instruments TL5580AIP Instrumentational OP Amps applications.
- Active probe
- Fast A/D and D/A converters
- Tablets
- Band-pass filter
- Integrator circuits
- Video amplifiers
- Signal transformation
- Automation control systems
- Multiplication circuits
- E-book readers
