TL594CD

16 Terminals 7V~40V 16-Pin TL594 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 1kHz~300kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TL594CD
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 788
Description: 16 Terminals 7V~40V 16-Pin TL594 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 1kHz~300kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Weight	141.690917mg
Operating Temperature	0°C~70°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	15V
Frequency	300kHz
Base Part Number	TL594
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	2
Output Voltage	40V
Output Type	Transistor Driver
Operating Supply Voltage	15V
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	7V~40V
Quiescent Current	12.4mA
Control Features	Dead Time Control, Frequency Control
Input Voltage (Min)	7V
Topology	Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
Control Mode	VOLTAGE-MODE
Frequency - Switching	1kHz~300kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	200ns
Synchronous Rectifier	No
Fall Time (Typ)	45 ns
Max Duty Cycle	45 %
Duty Cycle (Max)	97%
Output Phases	1
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL594CD Overview

It comes in the 16-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. For 2 outputs, the dc motor controller is appropriate. Tube is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 7V~40V. Suitable for work in a 0°C~70°C TA dc switcher. Using this switching controller, it is possible to switch at 1kHz~300kHz. dc dc regulators can be carried out with Surface Mount. Dead Time Control, Frequency Control is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of dc switching's functions can be performed on 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. TL594 can be used to locate other relevant dc to dc converter ics. There are only 16 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 7V. Based on the test statistics, DC regulator outputs voltage 40V. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. The maximum duty cycle of this voltage regulator dc to dc is set to 45 % to ensure reliability during power-up and power-down. Switching controller operates at 300kHz Hz. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 15V. DC switching uses 12.4mA when it is dormant. Switching controller is necessary to supply a voltage of 15V.

TL594CD Features

Transistor Driver Outputs
Switching Frequency: 1kHz~300kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz