TL594CD
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | SWITCHMODE™ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TL594 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 40V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Quiescent Current | 12.4mA |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 7V |
| Topology | Buck, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 200ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 45 ns |
| Max Frequency | 300kHz |
| Max Duty Cycle | 45 % |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Output Phases | 1 |
| Length | 9.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
TL594CD Overview
It comes in the 16-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. Tube is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. 7V~40V is the operating voltage and supply voltage of the dc control. Worked in an dc switcher with a -40°C~85°C TA rating. A generalization of dc dc regulator can be made using Surface Mount. To provide efficient switching control, Dead Time Control, Frequency Control is included in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of 16 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. TL594 can be searched for other relevant dc to dc converter ics. Pins number 16 of switching converter in total. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 7V. As determined by the test statistics, the output voltage of DC regulator is 40V. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. Voltage regulator dc to dc is designed to operate at 45 % duty cycle during power-ups and power-downs to ensure reliability. DC regulator300kHz has the maximum frequency. When running the voltage regulator dc to dc in a circuit, users should apply 15V to ensure safety and reliability. SWITCHMODE? series dc to dc voltage regulator belong to this series. When the dc switching is dormant, it uses 12.4mA.
TL594CD Features
Transistor Driver Outputs
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
TL594CD Applications
There are a lot of ON Semiconductor TL594CD DC to DC converter applications.
- Medical equipment
- Wide-range voltage regulation circuits
- Refrigerators of central air conditioners
- Constant current circuits
- Printing
- Industrial controllers
- Window air conditioners
- Bending machines
- Lathes
- Geothermal power
