TL594CDG
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | SWITCHMODE™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TL594 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 7V |
| Topology | Buck, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 40 ns |
| Max Frequency | 300kHz |
| Max Duty Cycle | 48 % |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Output Phases | 1 |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TL594CDG Overview
It comes in the 16-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. 2 outputs can be generated with the dc motor controller. PMIC packaging is solid with a Tube enclosure. The system can process Transistor Driver dc switching's outputs (s). Voltages 7V~40V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~85°C TA dc switcher. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Dead Time Control, Frequency Control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Terminal (s) of the switching converters are designed at the DUAL position. A variety of dc switching's functions can be performed on 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. You can find other relevant dc to dc converter ics by searching "TL594". 16 pins are on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 7V. The dc to dc regulator is limited to 40V input voltage. normally, the dc dc regulator's output current is 500mA, which you should keep in mind when starting a project. voltage regulator dc to dcs with a 48 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulator has a maximum frequency of 300kHz. To run the voltage regulator dc to dc safely and reliably, users should apply 15V to the voltage regulator dc to dc. It belongs to the SWITCHMODE? series of dc to dc voltage regulator.
TL594CDG Features
Transistor Driver Outputs
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 48 %
TL594CDG Applications
There are a lot of ON Semiconductor TL594CDG DC to DC converter applications.
- Smart grid
- Series voltage regulation circuits
- Hydrogen power
- Various precision measuring instruments
- Large fire protection systems
- Post equipment
- Current source circuits
- Die casting equipment
- Milling machines
- Laboratories
