TL594CDR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | SWITCHMODE™ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TL594 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 7V |
| Topology | Buck, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 40 ns |
| Max Frequency | 300kHz |
| Max Duty Cycle | 48 % |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Output Phases | 1 |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
TL594CDR2 Overview
It comes in the 16-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. 2 outputs are supported by the dc motor controller. A solid enclosure of Tape & Reel (TR) surrounds pmic. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 7V~40V. Work well in dc switchers with a -40°C~85°C TA. Surface Mount makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Dead Time Control, Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Thare switching converters has a terminal (s) at DUAL . Various 16 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 15V. In addition to "TL594", there are other relevant dc to dc converter ics you can find. There are a total of 16 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended to use 7V as the minimum input voltage of dc dc voltage regulator. The dc to dc regulator is limited to 40V input voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 500mA. voltage regulator dc to dcs with a 48 % duty cycle are designed to be reliable when powered on and powered off. It is estimated that this dc regulatorhas a maximum frequency of 300kHz. Users should apply 15V to operate the voltage regulator dc to dc safely and reliably. The dc to dc voltage regulator is from the SWITCHMODE? series.
TL594CDR2 Features
Transistor Driver Outputs
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 48 %
TL594CDR2 Applications
There are a lot of ON Semiconductor TL594CDR2 DC to DC converter applications.
- Die casting equipment
- Refrigerators of central air conditioners
- Game consoles
- Industrial robots
- CNC system
- Domestic water pumps
- Printing equipment
- Alternators
- Machining centers
- Radio equipment
