TL594CDTB
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | SWITCHMODE™ |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Qualification Status | COMMERCIAL |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 7V |
| Topology | Buck, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 0.5A |
| Frequency - Switching | 300kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Output Phases | 1 |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
TL594CDTB Overview
The switching controller fits in the 16-TSSOP (0.173, 4.40mm Width) package and is ideal for most applications. There is sufficient capacity to generate switching controller for outputs 2. PMIC packaging is solid with a Tube enclosure. The program can handle Transistor Driver dc switching's outputs (s). Voltages 7V~40V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. With this switching controller, you can switch at 300kHz. The Surface Mount makes it ideal for general dc dc regulator. Dead Time Control, Frequency Control is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . 16 terminations with various dc switching's functions. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. An input voltage of 7V is the minimum required for the dc dc voltage regulator. The dc to dc regulator can only accept a maximum input voltage of 40V. Current is output to the greatest value of 0.5A. There are several dc to dc voltage regulator in the SWITCHMODE? series.
TL594CDTB Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
TL594CDTB Applications
There are a lot of Rochester Electronics, LLC TL594CDTB DC to DC converter applications.
- Remotely powered electric motors
- Milling machines
- Planers
- Thermal power
- Magnetohydrodynamic power
- Network technology
- Emergency lighting monitoring equipment
- Surface processing equipment
- Window air conditioners
- Automatic testing equipment
