TL594CDTB
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | SWITCHMODE™ |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TL594 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 7V |
| Topology | Buck, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 40 ns |
| Max Frequency | 300kHz |
| Max Duty Cycle | 48 % |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Output Phases | 1 |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
TL594CDTB Overview
As a result of 16-TSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. 2 outputs can be generated with the dc motor controller. There is a Tube solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) are supported. Voltages 7V~40V are the dc control's supply voltage and operating voltage, respectively. A -40°C~85°C TA dc switcher is not a problem. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Dead Time Control, Frequency Control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of dc switching's functions can be performed on 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. Search for "TL594" to find other relevant dc to dc converter ics. Switching converter has a total of 16 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. The minimum input voltage of the dc dc voltage regulator should be 7V. The dc to dc regulator can only accept 40V input voltage. You should note down the dc dc regulator's usual output current of 500mA when you start a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 48 %. DC regulator's maximum frequency is 300kHz. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 15V. It belongs to the dc to dc voltage regulator series SWITCHMODE?.
TL594CDTB Features
Transistor Driver Outputs
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 48 %
TL594CDTB Applications
There are a lot of ON Semiconductor TL594CDTB DC to DC converter applications.
- Photovoltaic power
- Flexible manufacturing cells
- Electric heating, lighting
- Grinders
- Post equipment
- Boring machines
- Domestic water pumps
- Sensitive electronic devices
- Alternators
- Remotely powered electric motors
