TL594CN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | SWITCHMODE™ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Base Part Number | TL594 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 40V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Quiescent Current | 12.4mA |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 7V |
| Topology | Buck, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 40 ns |
| Max Frequency | 300kHz |
| Max Duty Cycle | 48 % |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 3.429mm |
| Length | 19.5326mm |
| Width | 6.858mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
TL594CN Overview
Capsuled in the 16-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. dc motor controller is suitable for 2 output generation. PMIC is packaged in a solid enclosure of Tube. The system can process Transistor Driver dc switching's outputs (s). DC control operates at 7V~40V volts and has 7V~40V supply voltage. Worked in an dc switcher with a -40°C~85°C TA rating. The Through Hole makes it ideal for general dc dc regulator. DCDC regulator is controlled efficiently by Dead Time Control, Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Switching converters are designed with the terminal (s) at position DUAL . A variety of terminations with 16 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. A search for "TL594" will reveal other relevant dc to dc converter ics. Switching converter has a total of 16 pins. There is a particular type of Switching Regulator or Controllers in switching converter. This dc dc voltage regulator should be powered by a voltage of 7V. Test statistics indicate DC regulator outputs 40V voltage. If you start a project, note down the dc dc regulator's usual output current of 500mA. A duty cycle set at 48 % ensures voltage regulator dc to dc reliability during power-on and power-off. This Through Hole makes DC switcher suitable for most prototypes and applications. 300kHz is the maximum frequency of this dc regulators. When running the voltage regulator dc to dc in a circuit, users should apply 15V to ensure safety and reliability. SWITCHMODE? is a series of dc to dc voltage regulator. In a dormant state, the dc switching uses 12.4mA.
TL594CN Features
Transistor Driver Outputs
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 48 %
TL594CN Applications
There are a lot of ON Semiconductor TL594CN DC to DC converter applications.
- Emergency lighting monitoring equipment
- Laboratories
- Adjustable voltage or current linear circuits
- Computer monitoring equipment of building
- Lathes
- Energy management systems
- Ball screw pair
- Digital precision reference circuits
- Solar power plants
- ATMs
