TL594ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Frequency | 300kHz |
| Base Part Number | TL594 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 40V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Quiescent Current | 12.4mA |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 7V |
| Topology | Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1kHz~300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 200ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 45 ns |
| Max Duty Cycle | 45 % |
| Duty Cycle (Max) | 97% |
| Output Phases | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL594ID Overview
As a result of 16-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. This dc motor controller can be used to generate outputs with 2 numbers. Tube is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. dc control's supply and operating voltages are 7V~40V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. With this switching controller, you can switch at 1kHz~300kHz. dc dc regulator can be generalized using Surface Mount. Dead Time Control, Frequency Control is used for efficient switching control in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. A switching converters's terminal (s) sits at the DUAL position. A variety of terminations with 16 of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. TL594 can be used to locate other relevant dc to dc converter ics. Switching converter has a total of 16 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. 7V should be the minimum input voltage for the dc dc voltage regulator. According to the test statistics, DC regulator outputs 40V voltage. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 45 % during power-up and power-down. Switching controller operates at a frequency of 300kHz. The dc switching utilizes 12.4mA when it is in a dormant state. The supply voltage should be 15V.
TL594ID Features
Transistor Driver Outputs
Switching Frequency: 1kHz~300kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz
TL594ID Applications
There are a lot of Texas Instruments TL594ID DC to DC converter applications.
- Terrestrial set-top boxes
- Thermal power
- Fire elevators
- Boring machines
- Cutting machine tools
- Scientific research
- ATMs
- Product burn-in
- Laboratories
- Precision electronic equipment
