Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Switching Regulator or Controllers |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
15V |
Frequency |
300kHz |
Base Part Number |
TL594 |
Function |
Step-Up, Step-Down, Step-Up/Step-Down |
Number of Outputs |
2 |
Output Voltage |
40V |
Output Type |
Transistor Driver |
Input Voltage-Nom |
15V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Output Configuration |
Positive |
Output Current |
200mA |
Voltage - Supply (Vcc/Vdd) |
7V~40V |
Control Features |
Dead Time Control, Frequency Control |
Input Voltage (Min) |
7V |
Topology |
Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
Control Mode |
VOLTAGE-MODE |
Frequency - Switching |
1kHz~300kHz |
Control Technique |
PULSE WIDTH MODULATION |
Rise Time |
200ns |
Synchronous Rectifier |
No |
Fall Time (Typ) |
45 ns |
Max Duty Cycle |
45 % |
Duty Cycle (Max) |
97% |
Output Phases |
1 |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TL594IDRG4 Overview
With its 16-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. It is sufficient to generate 2 outputs with this dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sDC control operates at 7V~40V volts and has 7V~40V supply voltage. Work well in dc switchers with a -40°C~85°C TA. The switching controller can be switched at 1kHz~300kHz. The Surface Mount value makes it suitable for general dc dc regulator. To provide efficient switching control, Dead Time Control, Frequency Control is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. The 16 terminations can be used for a wide range of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "TL594". There are 16 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. An input voltage of 7V is the minimum required for the dc dc voltage regulator. DC regulator outputs 40V voltage based on test statistics. In most cases, the dc dc regulator's output current is 200mA. This information should be noted when you begin working with the component. Voltage regulator dc to dc is designed to operate at 45 % duty cycle during power-ups and power-downs to ensure reliability. A frequency of 300kHz is set for the switching controller. There must be a voltage supply of 15V volts.
TL594IDRG4 Features
Transistor Driver Outputs
Switching Frequency: 1kHz~300kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz
TL594IDRG4 Applications
There are a lot of Texas Instruments TL594IDRG4 DC to DC converter applications.
- Computer application technology
- Gear/thread machining machines
- Post equipment
- Experimental setup
- Adjustable voltage or current linear circuits
- Sensitive electronic devices
- Smart grid
- Flexible manufacturing cells
- Automatic testing equipment
- Digital video recorders