TL594IN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Supply Voltage | 15V |
| Frequency | 300kHz |
| Base Part Number | TL594 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 40V |
| Output Type | Transistor Driver |
| Max Output Current | 200mA |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Quiescent Current | 12.4mA |
| Control Features | Dead Time Control, Frequency Control |
| Max Output Voltage | 40V |
| Topology | Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1kHz~300kHz |
| Max Input Voltage | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 200ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 45 ns |
| Max Duty Cycle | 45 % |
| Duty Cycle (Max) | 97% |
| Output Phases | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL594IN Overview
The switching controller fits in the 16-DIP (0.300, 7.62mm) package and is ideal for most applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tube. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 7V~40V volts and has 7V~40V supply voltage. A -40°C~85°C TA dc switcher is not a problem. It can switch at 1kHz~300kHz. The Through Hole value makes it suitable for general dc dc regulator. Dead Time Control, Frequency Control provides dcdc regulator efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Switching converters are designed with the terminal (s) at position DUAL . A variety of dc switching's functions can be performed on 16 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. In addition to "TL594", there are other relevant dc to dc converter ics you can find. There are a total of 16 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Based on the test statistics, DC regulator outputs voltage 40V. If you start a project, note down the dc dc regulator's usual output current of 200mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 45 %. A frequency of 300kHz is set for the switching controller. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 15V. In a dormant state, the dc switching uses 12.4mA. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 38V. Switching controller is necessary to provide a voltage of 15V. The dc switcher will not provide an output current greater than 200mA. Datasheets state the switching converter can output up to 40V volts.
TL594IN Features
Transistor Driver Outputs
Switching Frequency: 1kHz~300kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz
TL594IN Applications
There are a lot of Texas Instruments TL594IN DC to DC converter applications.
- Industrial controllers
- Mobile phones
- Motor controller circuits
- Shearing machines
- Arc suppression circuits
- Grinders
- Wide-range voltage regulation circuits
- Various precision measuring detectors
- Drilling machines
- Computer application technology
