TL594INSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Frequency | 300kHz |
| Base Part Number | TL594 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 40V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Quiescent Current | 12.4mA |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 7V |
| Topology | Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1kHz~300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 200ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 45 ns |
| Max Duty Cycle | 45 % |
| Duty Cycle (Max) | 97% |
| Output Phases | 1 |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL594INSR Overview
In the 16-SOIC (0.209, 5.30mm Width) package, the switching controller meets most application requirements. This dc motor controller can be used to generate outputs with 2 numbers. Cut Tape (CT) is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. dc control's supply and operating voltages are 7V~40V. Qualified to work in an dc switcher with -40°C~85°C TA. It can switch at 1kHz~300kHz. The Surface Mount makes it ideal for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Dead Time Control, Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. A variety of dc switching's functions can be performed on 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. You can find other relevant dc to dc converter ics by searching "TL594". 16 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. 7V should be the minimum input voltage for the dc dc voltage regulator. Statistically, DC regulator outputs 40V volts. You should note that the dc dc regulator's usual output current is 200mA. Voltage regulator dc to dc is designed to operate at 45 % duty cycle during power-ups and power-downs to ensure reliability. A frequency of 300kHz is used by the switching controller. As long as the dc switching is in a dormant state, it utilizes 12.4mA. There is a requirement for a 15V supply voltage.
TL594INSR Features
Transistor Driver Outputs
Switching Frequency: 1kHz~300kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz
TL594INSR Applications
There are a lot of Texas Instruments TL594INSR DC to DC converter applications.
- Computer-related products
- Computed tomography (CT)
- Power supplies of electronic gadgets
- Computer rooms
- Overvoltage protection circuits in TV sets
- Automatic testing equipment
- Sensitive electronic devices
- Precision electronic equipment
- Surface processing equipment
- Fire elevators
