TL594INSRG4

16 Terminals 7V~40V 16-Pin TL594 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 1kHz~300kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TL594INSRG4
Package: 16-SOIC (0.209, 5.30mm Width)
Datasheet: PDF
Stock: 239
Description: 16 Terminals 7V~40V 16-Pin TL594 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 1kHz~300kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.209, 5.30mm Width)
Surface Mount	YES
Number of Pins	16
Weight	200.686274mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	15V
Frequency	300kHz
Base Part Number	TL594
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	2
Output Voltage	40V
Output Type	Transistor Driver
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	7V~40V
Control Features	Dead Time Control, Frequency Control
Input Voltage (Min)	7V
Topology	Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
Control Mode	VOLTAGE-MODE
Frequency - Switching	1kHz~300kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	200ns
Synchronous Rectifier	No
Fall Time (Typ)	45 ns
Max Duty Cycle	45 %
Duty Cycle (Max)	97%
Output Phases	1
Height	2mm
Length	10.3mm
Width	5.3mm
Thickness	1.95mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL594INSRG4 Overview

With its 16-SOIC (0.209, 5.30mm Width) package, the switching controller fits the needs of most applications. 2 outputs are supported by the dc motor controller. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 7V~40V. A -40°C~85°C TA dc switcher is not a problem. The switching controller can be switched at 1kHz~300kHz. The Surface Mount value makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Dead Time Control, Frequency Control which allows efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a terminal (s) on the switching converters that are designed at DUAL. 16 terminations with a variety of function. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. TL594 can be used to locate other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. This dc dc voltage regulator should be powered by a voltage of 7V. The test statistics indicate that DC regulator outputs a voltage of 40V. In most cases, the dc dc regulator's output current is 200mA. This information should be noted when you begin working with the component. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 45 %. Switching controller operates at 300kHz Hz. This voltage controller requires a supply voltage of 15V.

TL594INSRG4 Features

Transistor Driver Outputs
Switching Frequency: 1kHz~300kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz