TL598CDG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 300kHz |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Input Voltage-Nom | 15V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 40V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Current - Output | 200mA |
| Frequency (Max) | 300kHz |
| Voltage - Output | 12V |
| Input Voltage (Min) | 7V |
| Topology | Flyback, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 35 ns |
| Max Duty Cycle | 45 % |
| Duty Cycle (Max) | 45 % |
| Number of Output Phases | 1 |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TL598CDG4 Overview
Capsuled in the SOIC package, the switching controller suits most application needs. For 2 outputs, the dc motor controller is appropriate. The switching controller can be switched at 300kHz. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. 16 terminations with a variety of function. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. The switching converter has a total of 16 pins. Switching converter is a type of Switching Regulator or Controllers in particular. 7V should be the minimum input voltage for the dc dc voltage regulator. A duty cycle set at 45 % ensures voltage regulator dc to dc reliability during power-on and power-off. Switching controller operates at 300kHz Hz. Keep dc regulator at a temperature of 0°C or above. DC regulator should run at a temperature 70°C higher than 70°C. The switch converters have 1 function (s) in total. A voltage regulators switching with 16 pins is designed. There is a maximum frequency of 300kHz that can be switched by the controller. It is ideal for switching controllers with 200mA input. It outputs a value of 12V in normaloperating procedures. Switching with 1 phases is the property of this controller. According to its maximum supply voltage rating, the voltage controller is rated 40V.
TL598CDG4 Features
Switching Frequency: 300kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz
TL598CDG4 Applications
There are a lot of Texas Instruments TL598CDG4 DC to DC converter applications.
- Milling machines
- Handheld GPS
- Computer monitoring equipment of building
- Automation technology
- Digital precision reference circuits
- Alternators
- Refrigerators of central air conditioners
- Pipe bending machines
- Low output voltage switching power supply circuits
- CMM
