TL598CN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Frequency | 300kHz |
| Base Part Number | TL598 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 7V |
| Topology | Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 35 ns |
| Max Duty Cycle | 45 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL598CN Overview
Capsuled in the 16-DIP (0.300, 7.62mm) package, the switching controller can be used for a wide range of applications. 2 outputs can be generated with the dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sDC control operates at 7V~40V volts and has 7V~40V supply voltage. Suitable for work in a 0°C~70°C TA dc switcher. This switching controller can switch at 100kHz. It is suitable for general dc dc regulator when it is set to Through Hole. Dead Time Control, Frequency Control provides dcdc regulator efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of terminations with 16 of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. Search for "TL598" to find other relevant dc to dc converter ics. Pins number 16 of switching converter in total. In particular, switching converter is a type of Switching Regulator or Controllers. 7V should be the minimum input voltage for the dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 5V. The dc to dc regulator can only accept 40V input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. The maximum duty cycle of this voltage regulator dc to dc is set to 45 % to ensure reliability during power-up and power-down. The switching controller works at a frequency of 300kHz.
TL598CN Features
Transistor Driver Outputs
Switching Frequency: 100kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz
TL598CN Applications
There are a lot of Texas Instruments TL598CN DC to DC converter applications.
- seismic instrument power circuits
- Industrial controllers
- Machining centers
- Packaging
- Bending machines
- Sink circuits
- Digital precision reference circuits
- Surge protection circuits
- Electrical power transmission
- Remotely powered electric motors
