TL712CDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL712 |
| Pin Count | 8 |
| Output Type | Complementary, Push-Pull, Tri-State, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Nominal Supply Current | 20mA |
| Output Current | 16mA |
| Max Supply Current | 20mA |
| Propagation Delay | 25 ns |
| Quiescent Current | 20mA |
| Response Time | 25 ns |
| Voltage - Supply, Single/Dual (±) | 4.75V~5.25V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 5mV |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 600μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL712CDR Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.Output type Complementary, Push-Pull, Tri-State, TTL is used for this comparator.We ship the part through Cut Tape (CT) .The comparator has a total of 8 terminals.Other Comparator like the device play a important role in the industry.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.A comparator of this type is typically of type Differential .Electronic comparator has a total of 1 elements.As a result, it contains 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching TL712 .There is 20mA current flowing in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 20mA in order to use the device normally.A current supply greater than 20mA may cause the comparator to malfunction.In order to operate the device, 5V power supplies are sufficient.The normal operation of the system requires 5V operating voltage.Comparator electronics is acceptable to pack the device by TR .
TL712CDR Features
Complementary, Push-Pull, Tri-State, TTL output capability
Differential IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 20mA
TL712CDR Applications
There are a lot of Texas Instruments TL712CDR linear comparators applications.
- Factory automation & control
- High-Speed Sampling Circuits
- Portable Battery Monitoring
- Power management
- Automotive
- Wearable Devices
- Set Top Boxes
- Automatic Test Equipment
- Infotainment and Clusters
- Laptop Computers
