Parameters |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
8 |
Weight |
72.603129mg |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Subcategory |
Comparator |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Pin Count |
8 |
Output Type |
TTL |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Number of Channels |
1 |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Nominal Supply Current |
12mA |
Max Supply Current |
12mA |
Propagation Delay |
12 ns |
Quiescent Current |
12mA |
Response Time |
6 ns |
Amplifier Type |
COMPARATOR |
Current - Input Bias |
600μA |
Output Current per Channel |
16mA |
Input Offset Voltage (Vos) |
10mV |
Hysteresis |
30 mV |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
TL714CDE4 Overview
Electronic comparator is packaged in SOIC for convenient transportation.This comparator is of the TTL output type.The comparator has 8 terminals.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator has 8 pins.The comparator consists of 8 pins.There is a quiescent current of 12mA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 12mA when using the device.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 12mA .The device can be run with 5V power supplies.In general, temperatures higher than 70°C are not recommended.Lower temperatures than 0°C are unsuitable for it.In the comparator, the maximum supply voltage is 5.25V .A minimum supply voltage of 4.75V is permitted for this comparator.To maintain the output quality, 1 channels work together.In essence, the comparator has a COMPARATOR amplifier with a high gain.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.
TL714CDE4 Features
TTL output capability
Quiescent Current: 12mA
COMPARATOR amplifier
TL714CDE4 Applications
There are a lot of Texas Instruments TL714CDE4 linear comparators applications.
- Laptop Computers
- High-Speed Differential Line Receiver
- Battery-Powered Electronics
- Notebooks and PDAs
- Factory automation & control
- General-Purpose, Low-Voltage Applications
- Security Detection Systems
- Threshold Detectors
- Handheld Instruments
- Battery management and protection