TL714CDG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 8 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 12mA |
| Max Supply Current | 12mA |
| Propagation Delay | 12 ns |
| Quiescent Current | 12mA |
| Response Time | 6 ns |
| Amplifier Type | COMPARATOR |
| Current - Input Bias | 600μA |
| Input Offset Voltage (Vos) | 10mV |
| Hysteresis | 30 mV |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TL714CDG4 Overview
In order to make transportation easier, it is packaged in SOIC .The comparator has an output type of TTL .There are 8 terminals on the comparator.The electrical component in this case belongs to the Comparator families.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.The device contains 8 pins.8 pins are available on the comparator.The comparator presents a quiescent current of 12mA volts.A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires 12mA supply current.A supply current exceeding 12mA may result in the comparator malfunctioning.In order to operate the device, 5V power supplies are sufficient.An increase in temperature over 70°C is not recommended.Comparator electronics cannot be operated at a temperature lower than 0°C .Compatibility is defined as 5.25V when the comparator is operating at its maximum supply voltage.Using a voltage as low as 4.75V is possible for this comparator.For the output to be of high quality, 1 channels must cooperate together.In essence, the comparator has a COMPARATOR amplifier with a high gain.The operating supply voltage for normal operation should be 5V .
TL714CDG4 Features
TTL output capability
Quiescent Current: 12mA
COMPARATOR amplifier
TL714CDG4 Applications
There are a lot of Texas Instruments TL714CDG4 linear comparators applications.
- Portable Battery Monitoring
- Factory automation & control
- Set Top Boxes
- Metering Systems
- Alarm and Monitoring Circuits
- Handheld Instruments
- Motor drives
- Portable and Battery-Powered Systems
- Ultra-Low Power Systems
- High-Speed Differential Line Receiver
