TL714CP
| Parameters | |
|---|---|
| Nominal Supply Current | 7mA |
| Max Supply Current | 12mA |
| Propagation Delay | 12 ns |
| Quiescent Current | 12mA |
| Response Time | 6 ns |
| Voltage - Supply, Single/Dual (±) | 4.75V~5.25V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 10mV |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 600μA |
| Hysteresis | 30mV |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TL714 |
| Pin Count | 8 |
| Output Type | Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
TL714CP Overview
A convenient transport package is provided in 8-DIP (0.300, 7.62mm) .There is a Push-Pull, TTL output type for this comparator.We ship the part through Tube .The comparator has 8 terminals.The chip belongs to Comparator .Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator is possible to classify the chip as Differential .There are a total of 1 elements in it.The board includes 8 pins.In general, mounting type Through Hole is recommended.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.There are 8 pins on the comparator.You may wish to search TL714 for more solutions that address your specific needs.As a result, this comparator displays a quiescent current of 12mA .There is a Through Hole for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current be 7mA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 12mA .In order to run the device, there are only 5V power supplies required.The operating supply voltage for normal operation should be 5V .
TL714CP Features
Push-Pull, TTL output capability
Differential IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 12mA
TL714CP Applications
There are a lot of Texas Instruments TL714CP linear comparators applications.
- Threshold Detectors
- Industrial
- Infotainment and Clusters
- Zero-Crossing Detectors
- Wireless Base Stations
- Notebooks and PDAs
- Hand-Held Electronics
- Point of load regulators
- Appliances
- Pulse, Squarewave, and Time Delay Generators
