TL7700CPSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TL7700 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 2/36V |
| Number of Channels | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 600μA |
| Max Supply Current | 1mA |
| Adjustable Threshold | YES |
| Quiescent Current | 600μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 10μs Maximum Propagation Delay |
| Threshold Voltage | +0.5V |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7700CPSR Overview
Power management is mounted through 8 terminals. Packaging is in the form of a Cut Tape (CT). As a reference, this IC management includes 1 functions for your convenience. There are 1 channels available on this supervisor, and each channel has a different function. There are 8-SOIC (0.209, 5.30mm Width) functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When 3V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management system can be categorized as a Power Management Circuits chip. In total, it has 8 pins on IC management. This power management system has 8 pins. A voltage (Vsup) that doesn't fall below 1.8V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 40V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The supply current of the power management is 600μA. Among other features, IC power can be also taken advantage of [0], for instance. You can always use TL7700, the base supervisor number, to search for similar PMICs of the manufacturer. In order to operate this power management, it requires 2/36V volts of power. The maximum supply temperature that PMIC chip can work with is 1mA.
TL7700CPSR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.8V
600μA operating supply current
TL7700CPSR Applications
There are a lot of Texas Instruments TL7700CPSR Voltage Supervisors applications.
- Refrigeration
- Set top box
- Power distribution systems of infant care room
- Analog circuit
- Personal computers
- DSP
- Precision measurement
- Important electronics for automotive protection
- Fire equipment power monitoring system
- Magnetic resonance imaging
