Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
POWER ON RESET GENERATOR |
Subcategory |
Power Management Circuits |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TL7700 |
Output |
Open Drain or Open Collector |
Pin Count |
8 |
Power Supplies |
2/36V |
Number of Channels |
1 |
Max Supply Voltage |
40V |
Min Supply Voltage |
1.8V |
Operating Supply Current |
600μA |
Max Supply Current |
1mA |
Adjustable Threshold |
YES |
Quiescent Current |
600μA |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
Adjustable/Selectable |
Number of Voltages Monitored |
1 |
Reset Timeout |
10μs Maximum Propagation Delay |
Threshold Voltage |
+0.5V |
Height |
1.2mm |
Length |
3mm |
Width |
4.4mm |
Thickness |
1mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TL7700CPW Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Power management is packaged in a Tube way. Power management is possible to find a series of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. As a reference, this IC power includes 8-TSSOP (0.173, 4.40mm Width) functions for your convenience. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts at a voltage of 3V. When 1 is applied to the power ic, it conducts. The power management belongs to the Power Management Circuits subcategory. Taking into account all of the pins, this power management has a total of 8. There are 8 pins on the power managment ic. Supply voltage (Vsup) should be at least 1.8V for this power management. The supply voltage (Vsup) should not exceed 40V volts in this IC power. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 600μA. As well as this, there are other features to mention such as [0], for example. It is always advisable to use TL7700, the base supervisor number, when searching for similar PMICs from the manufacturer. It requires 2/36V watts of power to operate this voltage supervisor. The maximum supply temperature voltage supervisor can handle is 1mA.
TL7700CPW Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.8V
600μA operating supply current
TL7700CPW Applications
There are a lot of Texas Instruments TL7700CPW Voltage Supervisors applications.
- Radar
- Data storage applications
- Unattended substation automation
- Leakage protection
- Detection of phase sequence
- Important electronics for automotive protection
- Automotive permanent magnet synchronous motors
- Battery-powered equipment
- Set top box
- Rechargeable batteries