TL7700CPWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TL7700 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 2/36V |
| Number of Channels | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1mA |
| Max Supply Current | 1mA |
| Adjustable Threshold | YES |
| Quiescent Current | 600μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 10μs Maximum Propagation Delay |
| Threshold Voltage | +0.5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7700CPWG4 Overview
There are 8 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tray way. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. There are 8-TSSOP (0.173, 4.40mm Width) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts in a 3V-voltage supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management belongs to the Power Management Circuits subcategory. A total of 8 pins are located on this power management. There are 8 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.8V. There should be no more than 40V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. For this power management, there is an 1mA volt supply current. In addition, IC management are other features such as [0], to mention only a few. You can always use TL7700, the base supervisor number, to search for similar PMICs of the manufacturer. To operate this power management, you will need at least 2/36V volts of power. The power management can work with a maximum supply temperature of 1mA.
TL7700CPWG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.8V
1mA operating supply current
TL7700CPWG4 Applications
There are a lot of Texas Instruments TL7700CPWG4 Voltage Supervisors applications.
- Leakage protection
- Magnetic resonance imaging
- Detection of phase sequence
- Digitally controlled LDO regulators circuit
- Urban rail transit weak current power monitoring
- Satellite navigation
- Power distribution systems of CCU
- Linux and server computing
- Multi-voltage system
- Dash board
