TL7700CPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TL7700 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 2/36V |
| Number of Channels | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 600μA |
| Max Supply Current | 1mA |
| Adjustable Threshold | YES |
| Quiescent Current | 600μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 10μs Maximum Propagation Delay |
| Threshold Voltage | +0.5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7700CPWR Overview
As you can see, this power management is mounted through 8 terminals. Packaged in the form of a Cut Tape (CT), power management is easy to use. For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of 8-TSSOP (0.173, 4.40mm Width) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts at a voltage of 3V. IC management is possible to find a succession of 1 voltages that have been checked. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 8 pins on the board. This power management system has 8 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.8V. During this IC power, the maximum supply voltage (Vsup) should not exceed 40V volts. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The supervisor's supply current is specified to 600μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. You can always use TL7700, the base supervisor number, to search for similar PMICs of the manufacturer. In order to operate this power management, it requires 2/36V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1mA.
TL7700CPWR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.8V
600μA operating supply current
TL7700CPWR Applications
There are a lot of Texas Instruments TL7700CPWR Voltage Supervisors applications.
- Magnetic resonance imaging
- Microprocessor system
- Efficient information transmission
- Functional modules
- Smart meter
- Detection of phase loss
- Leakage current detection
- Electrical fire monitoring system
- Data storage applications
- Embedded computing
