TL7700CPWRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TL7700 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 2/36V |
| Number of Channels | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 600μA |
| Max Supply Current | 1mA |
| Adjustable Threshold | YES |
| Quiescent Current | 600μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 10μs Maximum Propagation Delay |
| Threshold Voltage | +0.5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7700CPWRE4 Overview
This power management consists of 8 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. In this PMIC, you can find 8-TSSOP (0.173, 4.40mm Width) functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management is specified that the package peak reflow temperature should be 260. There is a voltage supply of 3V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. The power management system can be categorized as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. Power managment ic pin count is 8. There should be a minimum voltage supply (Vsup) of 1.8V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 40V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. You should set the supervisor's temperature during -40°C~85°C TA . During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. As far as the supply current of the power management is concerned, it is 600μA. Power management is also possible to add other features such as POWER ON RESET GENERATOR to name a few. It is always advisable to use TL7700, the base supervisor number, when searching for similar PMICs from the manufacturer. A power supply of 2/36V watts is required for the operation of this power management. A maximum supply temperature of 1mA can be used with this power management.
TL7700CPWRE4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.8V
600μA operating supply current
TL7700CPWRE4 Applications
There are a lot of Texas Instruments TL7700CPWRE4 Voltage Supervisors applications.
- Multi-voltage system
- Microprocessor system
- Precision measurement
- Functional modules
- Solar power charger
- Leakage protection
- Refrigeration
- Important electronics for automotive safety
- Electric heating appliances
- Low voltage/high power - AI, GPU
