TL7700CPWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TL7700 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 2/36V |
| Number of Channels | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1mA |
| Max Supply Current | 1mA |
| Adjustable Threshold | YES |
| Quiescent Current | 600μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 10μs Maximum Propagation Delay |
| Threshold Voltage | +0.5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7700CPWRG4 Overview
There are 8 terminals on this power management that allow it to be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes 8-TSSOP (0.173, 4.40mm Width) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 3V. IC management conducts in a 1-voltage supply. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 8 pins are located on this power management. This power management has 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.8V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 40V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 1mA. The other features include, for example, [0], which is just one example. If you want to search for similar IC managements of this manufacturer, you can always refer to TL7700, which is the base power ics number. To be able to work, this power management requires 2/36V volts of power. The maximum supply temperature that PMIC chip can work with is 1mA.
TL7700CPWRG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.8V
1mA operating supply current
TL7700CPWRG4 Applications
There are a lot of Texas Instruments TL7700CPWRG4 Voltage Supervisors applications.
- FPGA design
- Radar
- Electronics installed in the vehicle
- Stable power system
- Fire equipment power monitoring system
- Medical-specific isolation transformer
- Embedded computing
- Important electronics for automotive protection
- Household appliances
- Military communications
