Parameters |
Quiescent Current |
1.8mA |
Accuracy |
2 % |
Watchdog Timer |
No |
Reset |
Active High/Active Low |
Voltage - Threshold |
2.53V |
Number of Voltages Monitored |
1 |
Reset Timeout |
1μs Maximum Propagation Delay |
Min Reset Threshold Voltage |
2.48V |
Max Reset Threshold Voltage |
2.58V |
Threshold Voltage |
+2.53V |
Overvoltage Threshold |
2.58V |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
POWER ON RESET GENERATOR |
Subcategory |
Power Management Circuits |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Base Part Number |
TL7702 |
Output |
Complementary |
Pin Count |
8 |
Output Voltage |
16.5V |
Number of Channels |
1 |
Max Supply Voltage |
18V |
Min Supply Voltage |
3.5V |
Operating Supply Current |
1.8mA |
Nominal Supply Current |
1.8mA |
Max Supply Current |
3mA |
Adjustable Threshold |
YES |
TL7702ACP Overview
There are 8 terminals on this power management that allow it to be mounted. A Tube package is used to package the power management. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts in a 5V-voltage supply. IC management conducts in a 1-voltage supply. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 8. There are 8 pins on the supervisor. A voltage (Vsup) that doesn't fall below 3.5V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 18V volts of supply voltage (Vsup). The recommended mounting type is Through Hole. You should set the supervisor's temperature during 0°C~70°C TA . There is an output voltage of Complementary from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 1.8mA. Power management is also possible to add other features such as POWER ON RESET GENERATOR to name a few. You can always use TL7702, the base supervisor number, to search for similar PMICs of the manufacturer. The power management can work with a maximum supply temperature of 3mA.
TL7702ACP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.5V
1.8mA operating supply current
TL7702ACP Applications
There are a lot of Texas Instruments TL7702ACP Voltage Supervisors applications.
- Network equipment
- FPGA design
- Electrical fire monitoring system
- emergency room
- Leakage protection
- Digitally controlled LDO regulators circuit
- Precision measurement
- Fire equipment power monitoring system
- Power distribution systems of operating room
- Refrigeration