TL7702AIP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TL7702 |
| Output | Complementary |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3.5V |
| Operating Supply Current | 1.8mA |
| Max Supply Current | 3mA |
| Adjustable Threshold | YES |
| Quiescent Current | 1.8mA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.53V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1μs Maximum Propagation Delay |
| Min Reset Threshold Voltage | 2.48V |
| Max Reset Threshold Voltage | 2.58V |
| Threshold Voltage | +2.53V |
| Overvoltage Threshold | 2.58V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7702AIP Overview
A total of 8 terminals are used to mount this power management. In terms of packaging, power management follows the Tube model. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. When 5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 8. 8 pins are present on the power management system. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 3.5V. Voltage (Vsup) shouldn't exceed 18V volts in this PMIC. The recommended mounting type is Through Hole. This range of temperature should be set for the supervisors: -40°C~85°C TA. There is an output voltage of Complementary from this supervisor when it is operating. Supplied with a operating current of 1.8mA, this PMIC is capable of fully function as specified. Supervisors are also additional features, such as [0] for example, which are worth mentioning. A similar IC managements number of the manufacturer can always be found by using TL7702, the base power ics number. The maximum supply temperature is 3mA.
TL7702AIP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.5V
1.8mA operating supply current
TL7702AIP Applications
There are a lot of Texas Instruments TL7702AIP Voltage Supervisors applications.
- Microcontroller system
- Fire equipment power monitoring system
- Battery cars
- Satellite navigation
- Analog circuit
- Insulation fault location system
- DC stabilized power supply module
- Medical-specific insulation monitor
- Set top box
- Transformer load monitoring equipment
