TL7702BID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Simple Reset/Power-On Reset |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | TL7702 |
| Output | Complementary |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3.6V |
| Operating Supply Current | 1.8mA |
| Nominal Supply Current | 1.8mA |
| Max Supply Current | 3.5mA |
| Quiescent Current | 1.8mA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.53V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 270 ns Typical Propagation Delay |
| Min Reset Threshold Voltage | 2.505V |
| Max Reset Threshold Voltage | 2.555V |
| Overvoltage Threshold | 2.555V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7702BID Overview
Tube-packaging is used. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 1. 8 pins are present on the power management system. It is recommended that Vsup should not be less than 3.6V for this IC power. Voltage (Vsup) shouldn't exceed 18V volts in this PMIC. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Complementary. There is a supply current of 1.8mA for the power management. You can always use TL7702, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 3.5mA can be used.
TL7702BID Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.6V
1.8mA operating supply current
TL7702BID Applications
There are a lot of Texas Instruments TL7702BID Voltage Supervisors applications.
- Electronics installed in the vehicle
- Leakage current detection
- Radar
- Detection of phase sequence
- Urban rail transit weak current power monitoring
- Precision measurement
- Detection of phase loss
- Dash board
- Smart meter
- Sensitive sensors
